Atlas SD50 Gold DCC LOK Sound 5 Programming DCS210+ DT602D Test Run

Atlas SD50 Gold DCC LOK Sound 5 Programming DCS210+ DT602D Test Run

https://www.youtube.com/watch?v=kTtesd1TJw8&t=139s

 

Here is the transcript below:

All right, so we're back. Now we're going to program this. First thing going to do is reset it. So CVA, write it as a not a reset. That and then we're going to go ahead and read the decoder to see if it reset, which it should have given a minute. It has digit digit crap, digit tracks. Just be patient.


It'll come. Okay. So CV three is our address. Three, I'm sorry is set at one. And then number two, we're going to write 8636. I like the long address on these. And you'll also see CV 29 value is, um, 46 or 45. Usually when you reset it, it'll be set on the two dated a two digit address at a CV, six or 14.


But, you know, you just want to go over the manual or look, look it up, Google it. Digit track CV 29 values even though it's locked down, Decoder has an MRA standard, so it's all pretty much the same. Yeah. And then we're just going to read this back to see if it went through. And there you go. Test completed.


So that's done. So now let's put it on the live track and run it and see what, um, see if it works or not. I'm sure it will. There are all these repairs. You never know.


Yeah. Make sure that is the right throttle, buddy.


No lights functioning. A sound isn't good. Uh, let's try to move it. And there we go. It's moving. Of course. These are all default values. Uh, if you want to take the momentum off all that good stuff, you can. Four concepts, But it's up to you.


And then basically, just a few more tests back and forth. Make sure there's no noise in the in the gear train if there is. You might want to go back. So once it hits the corners and starts turning, the gears will make even louder noises. All right. Let's see what it's going to look like on the left.


And there we go. We've got a runner lights working, sounds on. Don't mind the sticker. I have two of these. So, um, I like to keep a little small posted in there so I know which addresses this one. This one actually got changed to 8639, but, uh, that's it. If you have any questions, leave them in the comments.


And, um, uh, thank you for watching the renegade model railroading.


Take care. Now.